Posts tagged as ' device ' ...
So it’s time to start developing Android apps, but you have a Nexus One running Froyo 2.2. What are you supposed to do at the stage “Create new Android Virtual Device (AVD)”? That’s exactly the question I was tackling today. In fact it’s not too important, since you would be developing for all types of Android phones, not just Nexus One, but in principle it seems right to set up the emulator exactly for the Nexus One.
So the first thing to do when creating a new virtual device is to give it a name. I was thinking about calling mine “NexusOne” but then I thought I should add a little more detail. However, there is a restriction in the naming policy: you are only allowed to include letters and numbers, no spaces or decimal points (but yes to underscores). This means the logical name “Nexus One Froyo 2.2” is no good. Finally I settled on “Nexus_One_Froyo_2-2”. I selected Target: “Android 2.2 – API Level 8”. If you don’t have it as an option, you need to run the Android SDK updater.
Next select the size of the SD card. I put 2000 MiB.
And the skin of the Nexus One would correctly be WVGA800, which corresponds to 800 x 480 resolution. Technically it’s a slightly different since the particular screen used, but it’s effectively the WVGA800.
Next there’s a bunch of settings to add. I’ve seen some people suggest you need to add all the hardware components manually, but according to the following chart most of the stuff is there by default. (Chart is from http://www.51testing.com/?uid-49689-action-viewspace-itemid-212142)
|Device ram size||The amount of physical RAM on the device, in megabytes. Default value is “96”.||hw.ramSize|
|Touch-screen support||Whether there is a touch screen or not on the device. Default value is “yes”.||hw.touchScreen|
|Trackball support||Whether there is a trackball on the device. Default value is “yes”.||hw.trackBall|
|Keyboard support||Whether the device has a QWERTY keyboard. Default value is “yes”.||hw.keyboard|
|DPad support||Whether the device has DPad keys. Default value is “yes”.||hw.dPad|
|GSM modem support||Whether there is a GSM modem in the device. Default value is “yes”.||hw.gsmModem|
|Camera support||Whether the device has a camera. Default value is “no”.||hw.camera|
|Maximum horizontal camera pixels||Default value is “640”.||hw.camera.maxHorizontalPixels|
|Maximum vertical camera pixels||Default value is “480”.||hw.camera.maxVerticalPixels|
|GPS support||Whether there is a GPS in the device. Default value is “yes”.||hw.gps|
|Battery support||Whether the device can run on a battery. Default value is “yes”.||hw.battery|
|Accelerometer||Whether there is an accelerometer in the device. Default value is “yes”.||hw.accelerometer|
|Audio recording support||Whether the device can record audio. Default value is “yes”.||hw.audioInput|
|Audio playback support||Whether the device can play audio. Default value is “yes”.||hw.audioOutput|
|SD Card support||Whether the device supports insertion/removal of virtual SD Cards. Default value is “yes”.||hw.sdCard|
|Cache partition support||Whether we use a /cache partition on the device. Default value is “yes”.||disk.cachePartition|
|Cache partition size||Default value is “66MB”.||disk.cachePartition.size|
Thus according to the chart we should add “Camera” and the 5.0 megapixel camera on the Nexus One corresponds to 2592 Maximum Horizontal Camera Pixels and 1944 Maximum Vertical Camera Pixels (The exact number of pixels is a guess of mine based on the 5.0 Megapixels, but unless you’re doing some hardcore testing I think it will be fine). Set the Device RAM Size to 512 MB for the Nexus One.
Ok, that’s about it. Now click “Create AVD” and the program will appear to freeze for a while. Finally, the AVD will be created and Nexus_One_Froyo_2-2 is located in the .android\avd folder.